| File Name | AKANE-SAN PROJECT |
|---|---|
| Size | 817KB |
| Version | 1.0 |
| Category | Magisk Modules |
| Android Requirement | + 6.0 |
| Published By | 217 |
| Rating | 4.9 / 5 |
| Flash Via | Magisk, KSU, APatch |
Get Link
Step-by-Step Installation:
- Ensure Root Access: The first prerequisite is having root access.
- Install via Magisk Manager:
- Open the Magisk Manager.
- Tap on the “Modules” section.
- Click “Install from Storage” and locate the geted file.
- Confirm the installation and allow the module to apply the necessary changes.
- Reboot Your Device: After installation, reboot your device to activate the module.
[ ⚡️ CORE CAPABILITIES ]
Perpetual C++ Enforcer: – The Perpetual C++ Enforcer has been recompiled to an obfuscated encrypted C++ binary and is now enforcing all SurfaceFlinger rules at all times.
Saturation Overdrive: A Hard-coded 2.0x Color Saturation boost to unlock AMOLED level of vividness on all display types.
Anti-Yellow Cold Matrix: This is a 3 x 3 3×3 color matrix (R:1.0, G:0.75, B:1.5) designed to eliminate any yellow colors that may show through and creates a very deep cold visual effect.
Deep Blue Boost: This is the companion flake to Deep Blue. It Boosts the blue channel in the YCbCr colour space for even whiter whites and deeper, more metallic colours.
Black Depth Optimizer: a feature that enables real-time dithering and HWUI buffer age optimization in order to achieve the deepest possible blacks on any panel.
Visual Revolution: This feature forces Color Mode into a non-adjustable state in order to prevent the system from interfering with the advanced calibration.
Universal compatibility The patch has been tested on all devices (Snapdragon, MediaTek, Exynos) and works on all of them every time.
[ 📝 TECHNICAL STATUS ]
Tested On: All Major Devices & Chipsets (Fully Stable).
The below is an example of a purely logical optimisation. A low overhead C++ loop that when executed does not have any appreciable impact on battery life. Fast frame rates are achieved without any consequence to the battery
Requirement: Magisk / KSU / APatch (Root Required).
Conflict-Free: Designed to run perfectly alongside any performance or memory modules.
[ 🚀 INSTALLATION NOTE ]
Enginewas designed to have a feature where the engine would activate the computer after a short duration following each power up. The purpose of this is to give the display drivers time to fully take affect and then start the engine computer. The time from power up to engine start up is typically in the range of 40-60 seconds.
Signal: Look for the notification: “Visual Core Active!”
Experience: Pure, vivid, and cold cinematic colors without the yellow blur
Telegram Group: https://t.me/Project217Official
