| File Name | ThermalMod |
|---|---|
| Size | 5KB |
| Version | v1.0 |
| Category | Magisk Modules |
| Android requirement | + 6.0 |
| Published By | @Laynsb |
| Rating | 4.9 / 5 |
| Flash Via | Magisk/kSU/Apatch |
Get Link
Step-by-Step Installation:
- Ensure Root Access: The first prerequisite is having root access via a custom recovery.
- Install via Magisk Manager:
- Open the Magisk Manager.
- Tap on the “Modules” section.
- Click “Install from Storage” and locate the geted file.
- Confirm the installation and allow the module to apply the necessary changes.
- Reboot Your Device: After installation, reboot your device to activate the module.
Changelog:
- Improved thermal stability & performance consistency
- Raised CPU/GPU trip points to 82–85 °C for sustained safe max performance
- Delayed thermal actions (longer EXIT times) to reduce FPS drops from rapid throttling
- Added temperature smoothing (ma_len filters) for stable sensor readings
- Fine-tuned cooler exit values for higher efficiency
- Balanced CPU/GPU throttling for smoother gameplay and multitasking
- Optimized cooler triggers across AP, GPU, Camera, WMT, and Modem zones
Hey there! If you’re rocking a phone with a MediaTek Dimensity 920 or 1080 chipset, you already know you’ve got a capable piece of hardware. That heat isn’t just uncomfortable to hold; it’s your phone’s way of slamming on the brakes, throttling performance to cool down. Suddenly, your buttery-smooth game starts stuttering right when you need it most. It’s frustrating, right? Well, what if I told you there’s a way to tell your phone, “Hey, relax, I’ve got this,” and push it to a safer, more consistent max? That’s exactly what the ThermalMod Magisk Module aims to do.
Why is a Thermal Mod Even Needed?
Think of your phone’s default thermal management like an overly cautious parent. The second the temperature hits a certain point—say, 70°C—it panics and drastically reduces your CPU and GPU speed. This is thermal throttling, and it’s the main culprit behind those annoying frame rate drops in games like Genshin Impact or PUBG Mobile.
The factory settings are designed for absolute safety, which is great, but they’re also often overly aggressive. They don’t trust the hardware to handle a slightly higher thermal envelope safely. This results in a rollercoaster experience: great performance for a minute, then a sudden drop, then it cools, then it boosts again. It’s inefficient and kills the immersion. This mod is for those of us who believe our devices can handle a bit more heat intelligently, trading that panic-induced throttling for rock-solid, sustained performance.
What Does the ThermalMod Magisk Module Actually Do?
This isn’t some simple hack that just disables throttling (which is dangerous!). Instead, it’s a finely-tuned revision of how your phone manages heat. Here’s the breakdown of what you get:
- Smoother Gameplay & Multitasking: By balancing how the CPU and GPU are throttled, the module prevents one from slowing down drastically before the other.
- Smarter, Safer Temperature Limits: Instead of hitting the panic button at 70°C, the module raises the trip points to a safer 82–85°C range. This allows your hardware to sustain its peak performance for much longer without ever reaching dangerous temperatures that could cause damage.
- Reduced Performance Stuttering: It delays thermal actions, giving the system a longer “exit time” before it decides to throttle. This stops the rapid, on-off throttling cycle that causes those infuriating FPS drops in the middle of a boss fight.
- Enhanced Stability with Sensor Smoothing: Ever notice your phone’s temperature reading jump around? This mod adds filtering (ma_len filters) to smooth out those sensor readings. A stable reading means the system makes smarter, less erratic decisions about cooling.
- Overall Efficiency Gains: It fine-tunes when the cooler kicks in and at what values across all components—AP, GPU, Camera, and more. This leads to better thermal工作效率 (work efficiency), so your phone spends more time performing and less time fighting itself.